|
Post by holleytool on Jul 26, 2009 20:42:42 GMT -6
hello i have a 750 dominator and i removed the power valves put in plugs. The engine is a 327 with 11.1 comp solid roller dart heads so 0n what would be a good primary jetting and what should the secondary be at right now front is 74 rear 86 with no power valves.thanks for any advice. Thank you terminator for the trans brake that is great.
|
|
|
Post by terminator on Jul 28, 2009 12:52:17 GMT -6
The 750 Dominator maybe a little Big for the engine. You may get a bog off the get go with this carb. It is worth a try though. Better to be a little Rich. Lean the jetting down from there. I would start with 72 in the front and back. Make a pass and read your plugs. Pull plug at end of race track if possible directly after run. The inner core should just be lightly colour the plug a tan colour. Look Deep into the plug core also. This area is your back section jetting. There is some good info on the internet if you search for it. Good luck tuning.
|
|
|
Post by holleytool on Jul 28, 2009 22:34:45 GMT -6
thank you terminator i will do that take care
|
|